万力轮胎股份有限公司三期工程年产600万条半钢子午线轮胎建设项目轮胎均匀性、动平衡联动检测线-招标公告

序号

产品名称

数量

简要技术规格

备注

1

轮胎均匀性、动平衡联动检测线

4条

*2.1、测试轮胎规格：

设备（润滑、输送、检测、打标等）要求能够适用于：1）低断面系列轮胎（如X/XZRX、X/XRX等）；2）AT/MT大块花纹轮胎。

2.2 *9) 重复性精度 ：采用X/XRX标准轮胎5×5测试， RFV、RFH1、LFV、LFH1以及CONY的平均标准偏差：均值≤2.4N，打标重复精度 ≤ X°（RFH1≥XN）。*X）轮辋自动调宽范围：5″，能够自动适应轮胎±1英寸的段宽公差。

2.3、偏心度检测：*采用线激光传感器进行测量，其中侧向2个传感器, 径向1个传感器, 共3个传感器。*3) 偏心度重复精度 （采用X/XRX标准轮胎进行5×5测试）。平均标准偏差（线扫描）：径向RRO：≤0.Xmm，侧向LRO ：≤0.Xmm，凹凸度 Bulge/Dent：≤0.Xmm。

2.4、*6) 准确度检验精度：充气状态下，加Xg砝码，不平衡量值误差±1g以内。*7) 重复性精度：静不平衡：≤Xg-cm，力偶：≤Xg-cm，各面： ≤Xg-cm，打标重复精度：≤X°(静不平衡量≥Xg)。*8）轮辋自动调宽范围X″，能够自动适应轮胎±1英寸的段宽公差。

*2.6、打标设置：数量：上3，下3(动动平衡、均匀性均有下打标)；形状: ◎ or ●；尺寸：ФXmm；颜色：双色打标（黄色、红色）。*2.8、X上层MES系统开放，允许并配合第三方进行必要的MES系统功能开发，试验数据应能上传至上层MES系统保存和应用。

Tire uniformity and dynamic balance linkage testing line of the third phase project with an annual output of 6 million semi-steel radial tires of Wanli Tire Co.

Guangdong provincial Machinery & Electric Equipment Tendering Corporation Limited entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on *** X-X-X.

1.Bidding Conditions

OverviewX uniformity, dynamic balance linkage inspection line，4 lines

Source of FundsX

Description of The Prepared Bidding ConditionsX

2.Bidding Content：

Bidding NoX-XAX

Project NameX uniformity, dynamic balance linkage inspection line

Place of ImplementationXG

List of Products：

3.Qualification Requirements For Bidder

Qualifications or PerformanceX the Chinese

Joint BidsX Available

Bid without the bidding documentsX Available

4.Acquisition of Bidding Documents

Beginning of Selling Bidding DocumentsX-X-X

Ending of Selling Bidding DocumentsX-X-X

Sell bidding doc online or notX

To ObtainX-site Purchase

Place：***

Price of Bidding Documents: ￥X/$X

Additional InstructionsX the Chinese

5.Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)X-X-X XX

Place of BidX/F meeting room Jin Ying Building, X Middle Huanshi Road, Guangzhou,P.R. China

Place of Bid OpeningX/F meeting room Jin Ying Building, X Middle Huanshi Road, Guangzhou,P.R. China

6.The bidder needs to register before the tender on ***nd the evaluation results will be released on
***span>

7.Contact Details

PurchasersX Tire Corporation Limited

Add.X District, Conghua,Guangzhou, P.R. China

ContactX. ZHONG

TelX

Bidding AgencyXg provincial Machinery & Electric Equipment Tendering Corporation Limited

Add.X/F Jin Ying Building,X Middle Huanshi Road, Guangzhou,P.R.ChiXan>

ContactX Liu，Ms Shen

Tel ： X-X、X、X

8.Remittance Approach

Bank(RMB):

Bank(USD):

Account NO.(RMB):

Account NO.(USD):